Jeep restoration
Perfect fit for almost impossible to find original replacement for Jeep CJ7.
These grommets work great when you want to run a gas, diesel or oil filler neck without a mounting flange. Use this to run through a quarter panel, frame or truck bed. They act as an positioner and isolator that allow you to angle your filler neck up to about 45 degrees.
ATTN!! THESE ARE NOT FOR USE IN THE FUEL TANK! THEY ARE NOT FUEL SAFE IN THAT WAY.
PART NUMBER | TUBE O.D. |
INSIDE DIAMETER A |
DIAMETER RANGE A |
PANEL HOLE B |
OUTSIDE DIAMETER C |
PANEL THICKNESS D |
1500 | 1-1/2" | 1.42" | 1.5-1.62 | 2-1/2" | 3" | .050 TO .125 |
1625 | 1-3/4" | 1.520 | 1.6-1.75 | 2-5/8" | 3-1/8 | .050 TO .125 |
2000 | 2" | 1.870 | 2.000 - 2.125 | 3 | 3-1/2 | .050 TO .125 |
2250 | 2-1/4" | 2.100 | 2.250 - 2.375 | 3-1/4 | 3-3/4 | .050 TO .125 |
Photo Example Of How This Looks | Click Here | |||||
Drill Out The Hole In Part# BEZ007 To have a Housing For These Grommets | Part# Bez007 Click Here | SEE EXAMPLE CLICK HERE | ||||
SEE RELATED ITEMS AT BOTTOM OF THIS PAGE (SCROLL DOWN) |
Perfect fit for almost impossible to find original replacement for Jeep CJ7.
Looks great, should work well!
Outer diameter smaller than expected but at least looks better than my 49 year QP gromment
As advertised. Wish it was a little stiffer for my application. But overall good.
Bought it to fit fresh water full neck on vintage trailer. Works great.
Worked perfectly
good stuff
Great Quality