Get 3% Off Online Orders When You Use Promo Code FILL

3/8" I.D. Molded Fuel Line Hose Elbow Bends 45°, 90°, 135°, 180° - 10mm

$19.95
(2 reviews) Write a Review
Part #
RMI33003
Condition:
New
Shipping:
Add to Cart For Quote
WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Handling Time:
Usually Ships Same Or Next Business Day
Create-Your-Own 3/8" Inner diameter Molded Fuel Line - Hose Elbow Swan 45, 90, 135, 180 Molded Fuel Line Hose Elbow Bends 45°, 90°, 135°, 180° -10mm

OUT OF STOCK

Now you can create your own 45, 90, 135, 180 fuel line. This 3/8" I.D. - J30R7 spec and is safe for use in submerged gasoline up to 50 PSI, and is ethanol safe! Just cut away the section you need and your set, you can use with our hose joiners to connect to longer runs. See Related Items At The Bottom Of This Page
  Hose Type:  Pre Formed Elbows
  Inner Diameter:  3/8" or 9.5mm
 Applications:  Low pressure Gasoline, Diesel, Ethanol E10, E85, PCV Universal/ Marine, RV, Automotive Fuel Filler, Industrial, Oil, 
 Outer Diameter:  .65"
 Wall Thickness:  
 Wall Reinforcement:  Synthetic yarn
 Fuel Types:   Leaded, Unleaded / Petrol / Diesel And Oil / Ethanol Blends
 Temperature Range:  -40°F to +257°F (-40°C to +125°C)
 Construction:  J30R7
 Working Pressure:  50PSI
 Burst Pressure:  250 PSI
 Submersible?:  Yes
1 YEAR

2 Reviews Hide Reviews Show Reviews

  • 5
    3/8th molded fuel/oil line with multiple bends

    Posted by Mike Kallie on Oct 14th 2019

    Replacing the oil lines on my old Harley and the stock stuff is obsolete. Finding this with the bends I needed allowed me to fit the line correctly without having to resort to several couplings.

  • 5
    Didn't even know this was a thing.

    Posted by Tommy on Aug 26th 2019

    I used this on my motorcycle to replace a 90* elbow in my fuel line. 2 less hose clamps and I'm certain a little better flow. Looks alot better too. Also used another portion for my crankcase vent tube.