2" Cab Chassis Fuel Filler Neck
This filler neck worked well for my project. I wish that the neck between the vent tube and outlet to the rubber filler tube to the tank was just a little bit longer but it all worked out well.
| MAKE | MODEL | YEAR RANGE | ENGINE | NOTES |
| Chevrolet | C3500 Cab & Chassis, Flatbed, Utility Body, Box Van, ECT |
1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 |
All Gas | |
| Chevrolet | C3500 Cab & Chassis, Flatbed, Utility Body, Box Van, ECT |
1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 |
All Gas | |
| Chevrolet / GMC | Silverado / Sierra | 2004 With External Vent Only | Flex Fuel Only | With External Vent Only |
| Chevrolet | Suburban | 2001 2002 2003 | All Gas | Upper Neck Only |
| Chevrolet | Tahoe | 2001 2002 2003 | All Gas | Upper Neck Only |
| GMC | Yukon | 2001 2002 2003 | All Gas | Upper Neck Only |
| GMC | Denali | 2001 2002 2003 | All Gas | Upper Neck Only |
| Cadillac | Escalade (NOT PICKUP) | 2001 2002 2003 | All Gas | Upper Neck Only |
| Uses This Gas Cap | 31833 (Click Here) |
| Fuel Type: | Gasoline |
| Main Pipe Diameter: | 2" OD |
| Vent Pipe Diameter: | 5/8" OD |
| Bolt Pattern | Standard GM 3 Hole. |
| Vent Stick-Out: | 1-3/4" (Off Of Main Pipe) |
| Length From Back of Flange: | 2-13/16" |
| Distance Between Main And vent Pipe: | 1-1/8" |
| Flange Diameter: | 4" At Widest Point. |
| SEE RELATED PRODUCTS BELOW |
This filler neck worked well for my project. I wish that the neck between the vent tube and outlet to the rubber filler tube to the tank was just a little bit longer but it all worked out well.
Although I would prefer one without the collar if u have it?
Used this in a custom application, worked perfectly.
This was an exact match for my vehicle. The quality was good. It would be nice if they included mounting screws.