Get 3% Off Online Orders When You Use Promo Code FILL

1-1/2" to 1-3/8" Fuel Fill Hose End ID Reducer 38mm to 35mm

$7.59
(2 reviews) Write a Review
Part #
B09
Condition:
New
Shipping:
Add to Cart For Quote
Bulk Pricing:
Buy in bulk and save

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 6 and pay only $7.25 each
  • Buy 7 - 10 and pay only $7.18 each
  • Buy 11 - 15 and pay only $7.10 each
  • Buy 16 - 25 and pay only $6.99 each
  • Buy 26 or above and pay only $6.50 each
WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
2.25_to_2_inch_fuel_filler_hose_inner_diameter_reducing_insert

Please See Details Below Before Ordering

*1) Insert this plug into one end of filler hose to make inner diameter smaller.
*2) Or slip over filler neck to make outer diameter larger.
You can use multiple reducers slipped within each other to achieve bigger gaps.

You Can Use These with any 1-1/2" I.D. hose and make it a 1-3/8" hose.

 Outer Diameter:  1-1/2"" or 38mm
 Inner Diameter:  1-3/8" or 35mm
 Total Gap  1/8"
 Length:  2"
 Material:  Nitrile Buna (NBR)
 Note:

If you are working with 1-3/8" OD Filler Neck Connections; Use this bushing to bring them up to 1-1/2" This is in order for you to use more "readily available parts " in 1-1/2". This works well for many C/K Series Pickups rear fuel tank relocation modifications.  
 RELATED ITEMS:  See Bottom Of This Web Page.

b09-reducer-diagram.jpg

1 YEAR

2 Reviews Hide Reviews Show Reviews

  • 5
    1-1/2" to 1-3/8" Fuel Fill Hose End ID Reducer

    Posted by sCOTT on Aug 3rd 2020

    The perfect solution to a totally unexpected problem. Purchased a repro '49-'52 Chev pass car tank from probably the best Co. in the hobby. Their expectation is that you use your existing filler with their tank and hose -- great, except the fill pipe is 1-3/8 od and the inlet on the tank is 1-1/2 od. Thanks to Filler Neck Supply, the new tank is in the car and ready to go without the filler-to-tank issue turning into a project unto itself!

  • 5
    reducer

    Posted by George on Feb 21st 2019

    This product was perfect. It solved an issue with replacing fuel fill hoses on a 43 foot sailboat that was made in Europe. With this reducer I was able to convert metric fittings to the standard 1 1/2 inch hose. We did the installation last week and it went fine.