Get 3% Off Online Orders When You Use Promo Code FILL
These Clamps Are Built Using A High Quality 304 Stainless Strap. These Are Most Commonly Used On Wire Reinforced Hoses That Need A High Amount Of Pressure To Seal Properly. They Are Also Nice When You Are Building A Custom Project Where Visual Looks Are An Important Factor. When A Worm Drive Clamp Is Just Not Enough; Get It Super Tight With These T Bolt Clamps! Just View The Guide Below And Select From The Part Numbers Above. SEE OUR RELATED HOSES AND ACCESSORIES BELOW.
| Part Number | Minimum Diameter | Max Diameter | Fits Our Hose Size |
| 32749 | 1.375 | 1.562 | 1" & 1-1/8" |
| 32750 | 1.5" | 1.625" | 1-1/4" |
| 32751 | 1.62 | 1.87 | 1-3/8" |
| 32752 | 1.75" | 2.00" | 1-3/8" & 1-1/2" |
| 32753 | 1.87 | 2.18 | 1-5/8 *** |
| 32754 | 2" | 2.31" | 1-5/8" & 1-3/4" |
| 32755 | 2.12" | 2.43" | 1-7/8" |
| 32756 | 2.25" | 2.56" | 2" |
| 32757 | 2.37" | 2.69" | 2" & 2-1/8" |
| 32758 | 2.5" | 2.81" | 2-1/4" & 2-1/2" |
| Material | Polished Stainless Steel. |
| Band/Bridge | 19mm or 3/4" Width/ 201/301 stainless steel. |
| Band Thickness | 0.7mm or .027. |
| Bolt Type | .25" - 28 Male Pipe Thread / 1/4" - 28 plated steel. |
| Nut Size | .4375" Hex-Head / (7/16" or 11mm) hex, Self Locking Nut.nylon insert, plated steel locknu |
| Recommended Torque | 75 (in/lbs) |
| NOTES | Very Good For Use With Hard Wall / Wire Reinforced Hoses. |
| Inches To mm Calculator | to easily convert inches to mm (CLICK HERE) |
