Hose reducing adapter
Fast shipping, works well
Reduces SAE I.D. | Reduces Metric I.D. | PART NUMBER | Length |
2" to 2-1/4" | 51mm-57mm | GH2225 | 6" |
Note: | Not For Use With E85 Or Fuels Blended With More Than 10% Ethanol. |
Length: | 6" |
Smaller Inner Diameter: | 2" or 2.00" Inch or 51mm |
Larger Inner Diameter: | 2-1/4" or 2.25" Inch or 57mm |
Material: | Rubber |
Material Thickness: | |
Related Hose Joiners: | 2" (Click Here) |
2-1/4"(Click Here) | |
Notes: | Cut Down Or Couple With Other Hose Pieces Or Tubing For Custom Applications. |
Related Product: | See Bottom Of This Page. |
Fast shipping, works well
Works well
Very nice. As advertised.
I had a ‘68 bug with an oval neck gas tank, and the old flared filler hose is no longer being produced. This worked perfectly for the application I needed it to. I ran it with a 2in connector in the middle and 2in IDA hosing on the other side to the filler neck. Be sure to use claps if you do anything like this.
100%perfect fit
Perfect fit for 1975 - 1982 Avanti II. Likely the same hose as used from the factory. Only required slight trimming for length.
A first rate product, in both material and fit...
Exactly what I needed, but more importantly, I was very impressed with the rapid turnaround for shipment - shipped the day it was ordered, and arrived in 2 days. THANKS!!
Perfectly fit in between the tank and the line.