Get 3% Off Online Orders When You Use Promo Code FILL

2" Inch (HARD FLEX) Rubber Gas Tank - Fuel Filler Hose (3ft)

$53.88
(3 reviews) Write a Review
Part #
23932
Condition:
New
Shipping:
Add to Cart For Quote
WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Handling Time:
Usually Ships Same Or Next Business Day
Gates 2" Inch (FLEXIBLE) Rubber Fuel Filler Hose 23932

OUT OF STOCK

This hose is flexible however at the same time it is stiff;  It does not expand over flared or beaded ends of gas tanks or filler neck. T Bolt Hose Clamps Are Recommended To Secure. Buy By 1ft, 2ft Or A Full A 3 Ft Sticks.
Length :          

3Ft 

Inner Diameter:  2" Inch or 51mm
Applications:  Marine, Automotive Fuel Filler, Oil Transfer.
Rating:  Suitable for use with gasoline, gasohol blends of ethanol, methanol, ethers, diesel and biodiesel to B20 (up to maximum concentrations allowed by the EPA).
Outer Diameter:  2-1/2" 
Wall Thickness:  1/4" 
Wall Reinforcement:  Spiral Steel Wire Helix.
Fuel Types:   Leaded, Unleaded / Gasahol / Petrol / Diesel And Oil.
Construction:  Built To Meet SAE-30R7. 
Cover Material:   CR (Chloroprene Rubber)
Inner Tube Material :  NBR (Nitrile Buna Rubber)
Temperature Rating:  -40°F to +212°F (-40°C to +100°C) with gasoline blends, -40°F to +125°F (-40°C to +51°C) with bio-diesel (B20).
Working Pressure:  20psi
 Characteristics:  Flexible Without Pinching Off But Very Stiff, Will Not Kink.  Will Not Expand Large Than 2"
RELATED PRODUCTS
45 Degree Stainless Elbow D200A45SS Click Here
90 Degree Stainless Elbow D200A90SS Click Here
Stainless Coupling CPL200SS Click Here
45 Degree Rubber Elbow D200A45 Click here
90 degree Rubber Elbow D200A90 Click Here

 

 

1 YEAR

3 Reviews Hide Reviews Show Reviews

  • 4
    gal filler hose

    Posted by Norm on Jun 6th 2018

    Excellent quality hose for securing gas stealers from easily cutting normal hose and stealing gas. Only problem, wish it came with a 45 degree bend on one end.

  • 5
    hard flex

    Posted by jessie l on May 25th 2018

    this hose is just like it sounds, i needed to cut the bead rolled ends off my filler neck go get it to slide in otherwise it worked out well and i will recomend this company to others

  • 3
    2" Gates Hose

    Posted by Sheldon pittman on Oct 13th 2017

    Not very flexable. It was advertised as "very flexable" but it's not. If you need to make a bend with less than 18" find another product.