it fit in the tank great
This one piece did not cost even half of what it would have cost me if I brought it from a supplier for the GMC Motorhome. this one piece replaced all my flexible connections. Thanks Don D.
Get 3% Off Online Orders When You Use Promo Code FILL
1-1/8" Inch 90° Degree Diesel / Gas Fuel Filler Hose Elbow 28" Long
$13.56
- Part #
- D112A90
- Condition:
- New
- Shipping:
- Add to Cart For Quote
- Bulk Pricing:
- Buy in bulk and save
- Buy 15 - 49 and pay only $12.48 each
- Buy 50 - 99 and pay only $10.36 each
- Buy 100 - 149 and pay only $8.36 each
- Buy 150 - 300 and pay only $7.24 each
- WARNING:
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Handling Time:
- Usually Ships Same Or Next Business Day
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Description: | 90 Degree Super Elbow. |
| Inside Diameter: | 1-1/8" Or 29mm Inner Diameter |
| Outside Diameter: | 1.31" or 33.5" |
| Radius: | 3" |
| Wall Thickness: | .177" Or 4.5mm |
| Total Length: | 28" Or 711mm (14"x14") |
| Material: | Nitrile Buna (NBR) Inner Tube With Hapalon (CSM) Outer Cover. |
| Reinforcement: | Nylon Thread (See Photo #2 (Click Here) |
| Maximum Pressure: | 20 psi |
| Spec: | Built To Meet SAE J30R6 |
| Related Item: | 1-1/8" Ultra Flex Section (Click Here) |
| Related Item: | 1-1/8" OD Steel Elbow (Click Here) |
| Related Items: | See Other Useful Items At Bottom Of This Page. |
1 YEAR
3 Reviews Hide Reviews Show Reviews
-
-
ELBOW FOR FUEL
REAL NICE EKLBOW, WAS ABLE TO CUT IT DOWN AND MAKE IT FIT MY TRUCK, NOW I CAN FILL UP USING MY FILL NECK. THANKS FOR BEING THE ONLY GAME IN TOWN
-
Good for my purpose
On a 95 Continental there is no hard filler unit available so I was able to cut the 3 tube 96 taurus neck in two smaller sections and used this with the thick clamps I bought here to do the job. Also got the other hoses here as well. This would work for other cars too.It is very good quality and the right size with plenty of rubber to put on the metal (there are no beads so I doubled clamped everything).
